Stainless Steel The Basic Types Of Surface Processing.
Release date: 2021-4-5 12:39:13 Visits: 350
There are roughly five types of surfaces that can be used for stainless steel. They can be combined to produce more end products.
The five species are:
1. rolling surface processing
2. mechanical surface processing
3. chemical surface processing
4. mesh surface processing and color surface processing
There are also some special surface treatments, but no matter which one is specified, the
Following steps should be followed:
1. Work with the manufacturer to agree on the required surface processing, it is better to prepare a sample as the future batch production standards.
2. When used in large areas, such as composite boards, it is necessary to ensure that the same batch of base coil or coil is used.
3. Selection of surface processing should take into account the manufacturing process, such as: in order to remove beads, may be necessary to grind the weld, but also to restore the original surface processing. It is difficult or even unable to meet this requirement.
4. for some surface processing, grinding or polishing texture is directional, is called unidirectional. If this pattern is made vertical rather than horizontal when used, dirt will not easily adhere to it and will be easy to clean.
